Shenzhen EDUP Electronics Technology Co., Ltd.
Main products:wireless router,wireless card,wireless modem
Contact Us
  • Contact Person : Ms. Liu Hellen
  • Company Name : Shenzhen EDUP Electronics Technology Co., Ltd.
  • Tel : 86-755-83648351
  • Fax : 86-755-83648350
  • Address : Guangdong,Shenzhen,15M Room, Block B, Modern Windows Building, Shenzhen, China
  • Country/Region : China
  • Zip : 518028

4-Port 54Mbps Wireless ADSL2+ Modem Router

4-Port 54Mbps Wireless ADSL2+ Modem Router
Product Detailed
Full speed, auto-sense ADSL 2+ routing, bridging 32M/64M Flash & Memory Inbuilt 3 antennas to boos


ADSL specification

Line Coding

Discrete Multi-Tone (DMT)Full rate ADSL ANSI T1.413 Issue 2

Standard Compliant

ITU G.992.1 (G.dmt) Splitter less G.992.2ITU G.994.1 G.996.1  ITU 992.5(ADSL 2+)

Data RateMaximum transmission rate: Downstream up to 25 Mbps, and

Upstream up to 1024 kbps

ATM specification
ATM Adaptation Layer

Support AAL5


Support 8 Permanent Virtual Circuits (PVCs)
Service Class

UBR, CBR, rt-VBR, nrt-VBR


ITU-T I.610 OAM Principles & Functions (include F4/F5)

Basic Protocol
RFC 2684Multiple protocol encapsulation over AAL5

Support Logical Link Control (LLC) encapsulationSupport VC-based multiplexingSupport Bridged and Routing

RFC 2364

PPP over AAL5Support LLC encapsulationSupport VC-based multiplexing


Support PPP over Ethernet RelaySupport PPP over Ethernet

RFC 1577Classical IP over ATM
Bridged Function
IEEE802.1dTransparent, learning bridge with spanning tree supportPPPoE relay
Routing Function

IPv4, TCP, UDP, ICMP, ARP, RARP, proxy-ARPRouting Information Protocol (RIP, RIPv2)Static Routing

DHCPDHCP Server/Client/Relay
DNSDNS relay
IGMPIGMP v1, v2 Proxy
IP sharingNetwork Address Translator (NAT)
AuthenticationPPP with PAP/CHAP
IP FilterRaw/IP FilteringSPI
VPN Pass ThroughVPN: L2TP Client/Server & L2TP/PPTP Pass ThroughVPN: IPSec Pass Through
Deny of ServiceDoS (UDP, TCP), Detection of Known AttacksDetect port scan attackID/Password Authentication

Configuration through menu driven console via RS232Configuration through Web interfaceConfiguration through Telnet connectionSNMPv1 and MIB II( RFC1213 )Implement Log & Trace function

Remote ManagementPVC&ECO
F/W UpgradeTFTP, FTP and HTTP for firmware download
Led IndicationOnOffFlashing
PowerPower OnPower downN/A
PC (LAN TX/RX)LAN enableLAN disableData transmission
Status (WAN link)ADSL line upADSL line disconnectHandshaking
Line (WAN TX/RX)N/ANo data transmissionData transmission
ResetOne Button for reset and default
Power SwitchOne Switch for power on/off
Interface Port
LAN4 RJ-45 port for 10/100 Ethernet connection
WAN1 RJ-11 port ADSL line
Serial(Inner)1 craft port for console management
USB(optional)1 USB-B port for USB1.1 connection
Power Supply
Input VoltageAC 220V/50HZ
Power Consumption15VAC, 700mA
Operating Environment
Operating Temperature32F to 104F (0 C to 40 C)
Non-Operating Temperature-4F to 149F (-20 C to 65 C)
Humidity5% to 95% (non-condensing

4-Port 54Mbps Wireless ADSL2+ Modem Router

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.